Views: 80 Author: Site Editor Publish Time: 2026-11-09 Origin: Site

Start with two numbers when comparing parking lifts: cars per unit and clear ceiling height. The first tells you how much parking a bay can hold. The second tells you which configurations are worth checking. Then use the site survey to confirm vehicle weights, operating clearances and whether each driver needs independent access.
| Model and type | Cars per unit | Rated load | Clearance to check |
|---|---|---|---|
| Hydro-Park 1127 Two-post stacker | 2 | 2,700 kg on the lifting platform | Published lifting height: 2,100 mm. Check ceiling clearance with the intended vehicles and platform position. |
| TPTP-2 Two-post tilting lift | 2 | 2,000 kg on the lifting platform | From 2,900 mm clear ceiling height with a suitable sedan layout. |
| Hydro-Park 2525 Four-post triple stacker | 3 | 2,500 kg on level 2 2,000 kg on level 3 | Check the height of all three vehicles and the clearance needed during platform travel. |
| Starke 2127 Two-post pit lift | 2 | 2,700 kg per parking space | Standard pit depth from 1,750 mm. Check above-floor headroom separately. |
This two-post parking lift suits vehicle storage, valet parking and garages where drivers can coordinate vehicle retrieval. The ground-level car must be moved before the upper car can be retrieved. Check the vehicle heights and upper platform position against the lowest overhead obstruction.
The tilting platform makes the TPTP-2 a candidate for garages with limited headroom. MUTRADE lists installations from a 2.9 m ceiling for suitable vehicles. Check both vehicle profiles against the operating envelope, especially where beams, ducts or door tracks cross the bay.
The Hydro-Park 2525 four-post triple stacker suits workshops, dealerships and vehicle collections where storage density matters. Assign cars to the second and third levels by weight and height. Plan how staff will clear the lower positions when retrieving a vehicle from above.
The Starke 2127 pit parking lift lets drivers retrieve either vehicle without first moving the other. That makes it a candidate for separately assigned spaces in residential and mixed-use garages where a suitable pit can be provided.
Measure from the finished floor to the lowest obstruction in the equipment and vehicle travel area. Include beams, ducts, sprinklers and garage door tracks. Record the height and weight of the vehicles intended for each level, along with the bay dimensions and pit depth where applicable. Check the complete layout against the approved installation drawing.
See the illustrated Hydro Park product catalogue for model diagrams and dimensional references.
Founded in Qingdao in 2009, MUTRADE designs and manufactures mechanical and automated parking equipment and has served customers in more than 100 countries. Its range includes two-post and four-post parking lifts, pit parking systems, puzzle parking, automated parking systems and vehicle elevators.
Poland. A mixed-use development increased its underground capacity from 50 to 100 spaces with Starke 2127 pit parking lifts.
Uruguay. An automotive workshop installed four Hydro-Park 2525 units to increase vehicle storage within its facility.
Send MUTRADE your floor plan, clear ceiling height, target number of spaces, vehicle dimensions and weights, and access requirements. Include pit dimensions if applicable. Our team can review which parking lift configurations fit your site.
Contact MUTRADE