Availability: | |
---|---|
Quantity: | |
Starke 1127/1121
Two Post Parking Lift
Introduction
Starke 1127 and Starke 1121 are wholly new designed stackers by Mutrade with more ideal structure that offers 100mm wider platform than Hydro-Park 1127/1123 but within smaller installation space. Each unit provides 2 dependent parking spaces with the platform moving vertically only, ground car has to be moved to use the upper space of platform. Suitable for permanent parking, valet parking, car storage, or other places with attendant. In case of short time user only possible on lower platform, or with attendant or valet parking both levels are possible for short time user. When used indoor, operation can be achieved by wall-mounted key switch panel. For outdoor usage, control post is also optional.
- Parking 2 cars above each other
- Lifting capacity 2100kg (Starke 1121) or 2700kg (Starke 1127).
- Standard platform width 2200mm, which can be maximized to 2700mm.
- Car heights on ground up to 2050mm.
- Direct drive by German structure cylinder.
- Mechanical anti-falling locks protect platform from falling all the way, and enable multiple stopping heights.
- Synchronization chain keep platform level under all conditions.
- 24v control circuit protects users from electric shock
- Galvanized waving plates ensure the platform in excellent performance of rust and skid resistance - Anti-rust bolts & nuts passing 48hrs Salt Spray Test.
- Akzo Nobel powder coating provides long lasting surfificial protection
- Top class quality guarantee (CE certifified by German TUV)
1 Limit switch 2 Control box 3 Power pack 4 Hydraulic cylinder 5 Primary post 6 Carriage 7 Galvanized waving plate
8 Subsidiary post 9 Front support
TUV compliant, which is the most authoritative certification in the world
Certification standard 2006/42/EC and EN14010
Low usage cost
When the platform moves down, it will be driven by gravity, so there is no electricity consumption for hydraulic power pack
Wider platform
The standard Starke 1127/1121 provide 2200mm usable width, which can be maximized to 2700mm to extremely allow users park their cars in the easiest way
Less space occupied
When the platform usable width is wider, the overall width of Starke 1127/1121 is still less to save more space.
Modular connection, innovative sharing post design
The Starke two post car parking lift owns sharing post design. Combine multiple units at your will based on usage
Flexible operation location
Operation panel can be placed on the wall or proper position closing the lift
New hydraulic system which owns Ashkenazi structure
The hydraulic system adopts German top-level product structure design, which is stable and reliable, avoid the maintenance troubles, and its lifetime is twice as long as that of the old one
Galvanized pallet
Far more beautiful and durable than observed, lifetime more than doubled. Galvanized waving plates ensure the platform in excellent performance of rust and skid resistance.
Zero accident security system
All-new upgraded security system, really reaches zero accident
Dynamic locking device
The moving platform can be held by mechanical locks on the post to protect cars from falling
More stable electric motors
Newly upgraded power pack unit system
Further strengthened main structure of the equipment
The thickness of the steel plates and the weld joints have increased by 10% compared to the predecessor
Gentle metallic touch, excellent surface finishing
After applying AkzoNobel powder, color saturation, weather resistance and its adhesion are significantly enhanced
Rich color
Great care is taken with the treatment of lacquer face, in order to improve the quality of products on surface looking to the maximum extent
Strong adhesion
The weather resistance of the spray powder has better performance under special technology, which can stand wear and tear
Superior chains provided by Korean chain manufacturer
The life span is 20% longer than that of the domestic chains
Galvanized screw bolts based on the European standard
Longer lifetime, much higher corrosion resistance
Unique hydraulic centralized control (optional)
Perfect shared power pack unit solution
Laser cutting + robotic welding
Accurate laser cutting improves the accuracy of the parts, and automated robotic welding makes the weld joints more firm and beautiful
Mechanical anti-falling safety lock on each post holds the platform to prevent falling
New and unique carriage mechanism keeps the platform always horizontal no matter forward or reverse parking
24v electric lock release has no harm for operator
Electric protection for power over load or under voltage.
Auto locking system in case electrical failure
Emergency stop button can be pressed to stop platform moving at once
Pressure relief valve & throttle valve
Limited switch in the top of the post. When the platform goes to the appointed height, it will automatic stopped to avoid the wrong operation
Synchronization chain keeps the platform always in balance
10 Electric protection for power over load or under voltage
Clear platform width of 2200 mm for car widths of 2000 mm. For large touring sedans we recommend a clear platform width of at least 2300-2700 mm. According to ISO 3864 the floor has to be marked with 100 mm wide yellow-black at a distance of 500 mm from the platform edge by the purchaser (to be performed according to local regulations.) The lowering speed of an empty platform is considerably lower than a loaded one. It is not possible to have channels or undercuts and/or concrete haunches along the floor-to-wall joints. It the event that channels or undercuts are necessary, the system width needs to be reduced or the installation width needs to be wider. The manufacturer reserve the right to construction or model modifications and/or alterations. Furthermore, the right to any subsequent part modification and/or variations and amendments in procedures and standards due to technical and engineering progresses in the art or due to environmental regulation changes, are also hereby reserved.
Powder coating is applied as a free-flowing, dry powder. It is typically applied electrostatically and is then cured under heat to allow it to flow and form a "skin". It is usually used to create a hard finish that is tougher than conventional paint.
Scope of application
Suitable for residential buildings, office buildings and business premises, hotels Only for long-term users that have been instructed on how to use the system For frequently changing users (e.g. for office, hotel and business premises or similar): - only parking on ground level - performance of technical system adjustments in necessary - consultation with Mutrade is mandatory
Electrical installation preparation
Cabling preparation to be performed by the customer: - Up to the main switch to be in place prior to starting the installation operations - Connection to the main switch during installation - System functional check testing can be performed by the electrician provided by the customer Grounding and potential equalization:
- To be performed by the customer compliant to local regulations - Connections required every 10 meters
Temperature
The installation is designed to operate between +5°and +40°C. Atmospheric Humidity: 50% at +40°C. If the local circumstances differ from the above please contact Mutrade.
Parking
- Drive the car backward onto the appropriate position of the platform. Collision with the control arm and side beams shall be avoided. - Put the brake on after vehicle parked on the targeted position to avoid any accidental movement. - Open the car door carefully to avoid any collision. Pay attention to the waving
plates and side beams in case any falling down of person. - Turning UP to lift the car to the appropriate position, and the platform will be locked automatically. - Before another vehicle parked under platform, please check and make sure the nether vehicle is lower than platform height, to avoid any damage.
Protection against corrosion
Independent of a maintenance workings has to be carried out according to Mutrade Cleaning and Maintenance Instruction regularly. Clean up galvanized parts and platforms of dirt and road salt as well as other pollution (corrosion danger)!
Noise protection
Insulation figure of the construction of min. Rw = 57 dB Walls which are bordering the parking systems must be done as single wall and deflection resistant with min. m = 300 kg/ m² Solid ceiling above the parking systems with min. m = 400 kg/ m² At differing constructional conditions additional sound absorbing measures are to be provided by the customer The best results are reached by separated sole plates from the construction.
Fire safety
Each and every fire safety requirement and all possible mandatory item(s) and equipment(s) (fire extinguishing systems and fire alarm systems, etc.) are to be provided by the customer.
Railings
If walkways are arranged directly to the side or behind the systems, railings have to be provided acc. EN ISO 13857 by client acc. to local requirements, height min. 200cm.
Starke 1127/1121
Two Post Parking Lift
Introduction
Starke 1127 and Starke 1121 are wholly new designed stackers by Mutrade with more ideal structure that offers 100mm wider platform than Hydro-Park 1127/1123 but within smaller installation space. Each unit provides 2 dependent parking spaces with the platform moving vertically only, ground car has to be moved to use the upper space of platform. Suitable for permanent parking, valet parking, car storage, or other places with attendant. In case of short time user only possible on lower platform, or with attendant or valet parking both levels are possible for short time user. When used indoor, operation can be achieved by wall-mounted key switch panel. For outdoor usage, control post is also optional.
- Parking 2 cars above each other
- Lifting capacity 2100kg (Starke 1121) or 2700kg (Starke 1127).
- Standard platform width 2200mm, which can be maximized to 2700mm.
- Car heights on ground up to 2050mm.
- Direct drive by German structure cylinder.
- Mechanical anti-falling locks protect platform from falling all the way, and enable multiple stopping heights.
- Synchronization chain keep platform level under all conditions.
- 24v control circuit protects users from electric shock
- Galvanized waving plates ensure the platform in excellent performance of rust and skid resistance - Anti-rust bolts & nuts passing 48hrs Salt Spray Test.
- Akzo Nobel powder coating provides long lasting surfificial protection
- Top class quality guarantee (CE certifified by German TUV)
1 Limit switch 2 Control box 3 Power pack 4 Hydraulic cylinder 5 Primary post 6 Carriage 7 Galvanized waving plate
8 Subsidiary post 9 Front support
TUV compliant, which is the most authoritative certification in the world
Certification standard 2006/42/EC and EN14010
Low usage cost
When the platform moves down, it will be driven by gravity, so there is no electricity consumption for hydraulic power pack
Wider platform
The standard Starke 1127/1121 provide 2200mm usable width, which can be maximized to 2700mm to extremely allow users park their cars in the easiest way
Less space occupied
When the platform usable width is wider, the overall width of Starke 1127/1121 is still less to save more space.
Modular connection, innovative sharing post design
The Starke two post car parking lift owns sharing post design. Combine multiple units at your will based on usage
Flexible operation location
Operation panel can be placed on the wall or proper position closing the lift
New hydraulic system which owns Ashkenazi structure
The hydraulic system adopts German top-level product structure design, which is stable and reliable, avoid the maintenance troubles, and its lifetime is twice as long as that of the old one
Galvanized pallet
Far more beautiful and durable than observed, lifetime more than doubled. Galvanized waving plates ensure the platform in excellent performance of rust and skid resistance.
Zero accident security system
All-new upgraded security system, really reaches zero accident
Dynamic locking device
The moving platform can be held by mechanical locks on the post to protect cars from falling
More stable electric motors
Newly upgraded power pack unit system
Further strengthened main structure of the equipment
The thickness of the steel plates and the weld joints have increased by 10% compared to the predecessor
Gentle metallic touch, excellent surface finishing
After applying AkzoNobel powder, color saturation, weather resistance and its adhesion are significantly enhanced
Rich color
Great care is taken with the treatment of lacquer face, in order to improve the quality of products on surface looking to the maximum extent
Strong adhesion
The weather resistance of the spray powder has better performance under special technology, which can stand wear and tear
Superior chains provided by Korean chain manufacturer
The life span is 20% longer than that of the domestic chains
Galvanized screw bolts based on the European standard
Longer lifetime, much higher corrosion resistance
Unique hydraulic centralized control (optional)
Perfect shared power pack unit solution
Laser cutting + robotic welding
Accurate laser cutting improves the accuracy of the parts, and automated robotic welding makes the weld joints more firm and beautiful
Mechanical anti-falling safety lock on each post holds the platform to prevent falling
New and unique carriage mechanism keeps the platform always horizontal no matter forward or reverse parking
24v electric lock release has no harm for operator
Electric protection for power over load or under voltage.
Auto locking system in case electrical failure
Emergency stop button can be pressed to stop platform moving at once
Pressure relief valve & throttle valve
Limited switch in the top of the post. When the platform goes to the appointed height, it will automatic stopped to avoid the wrong operation
Synchronization chain keeps the platform always in balance
10 Electric protection for power over load or under voltage
Clear platform width of 2200 mm for car widths of 2000 mm. For large touring sedans we recommend a clear platform width of at least 2300-2700 mm. According to ISO 3864 the floor has to be marked with 100 mm wide yellow-black at a distance of 500 mm from the platform edge by the purchaser (to be performed according to local regulations.) The lowering speed of an empty platform is considerably lower than a loaded one. It is not possible to have channels or undercuts and/or concrete haunches along the floor-to-wall joints. It the event that channels or undercuts are necessary, the system width needs to be reduced or the installation width needs to be wider. The manufacturer reserve the right to construction or model modifications and/or alterations. Furthermore, the right to any subsequent part modification and/or variations and amendments in procedures and standards due to technical and engineering progresses in the art or due to environmental regulation changes, are also hereby reserved.
Powder coating is applied as a free-flowing, dry powder. It is typically applied electrostatically and is then cured under heat to allow it to flow and form a "skin". It is usually used to create a hard finish that is tougher than conventional paint.
Scope of application
Suitable for residential buildings, office buildings and business premises, hotels Only for long-term users that have been instructed on how to use the system For frequently changing users (e.g. for office, hotel and business premises or similar): - only parking on ground level - performance of technical system adjustments in necessary - consultation with Mutrade is mandatory
Electrical installation preparation
Cabling preparation to be performed by the customer: - Up to the main switch to be in place prior to starting the installation operations - Connection to the main switch during installation - System functional check testing can be performed by the electrician provided by the customer Grounding and potential equalization:
- To be performed by the customer compliant to local regulations - Connections required every 10 meters
Temperature
The installation is designed to operate between +5°and +40°C. Atmospheric Humidity: 50% at +40°C. If the local circumstances differ from the above please contact Mutrade.
Parking
- Drive the car backward onto the appropriate position of the platform. Collision with the control arm and side beams shall be avoided. - Put the brake on after vehicle parked on the targeted position to avoid any accidental movement. - Open the car door carefully to avoid any collision. Pay attention to the waving
plates and side beams in case any falling down of person. - Turning UP to lift the car to the appropriate position, and the platform will be locked automatically. - Before another vehicle parked under platform, please check and make sure the nether vehicle is lower than platform height, to avoid any damage.
Protection against corrosion
Independent of a maintenance workings has to be carried out according to Mutrade Cleaning and Maintenance Instruction regularly. Clean up galvanized parts and platforms of dirt and road salt as well as other pollution (corrosion danger)!
Noise protection
Insulation figure of the construction of min. Rw = 57 dB Walls which are bordering the parking systems must be done as single wall and deflection resistant with min. m = 300 kg/ m² Solid ceiling above the parking systems with min. m = 400 kg/ m² At differing constructional conditions additional sound absorbing measures are to be provided by the customer The best results are reached by separated sole plates from the construction.
Fire safety
Each and every fire safety requirement and all possible mandatory item(s) and equipment(s) (fire extinguishing systems and fire alarm systems, etc.) are to be provided by the customer.
Railings
If walkways are arranged directly to the side or behind the systems, railings have to be provided acc. EN ISO 13857 by client acc. to local requirements, height min. 200cm.