Phone
+86-53255579606 or 9608
PRODUCTS
You are here: Home » Products » Starke Series » ST1121 / ST1127 » Starke1121&1127

Starke1121&1127

Quantity:

Starke 1127/1121

Two Post Parking Lift


Starke1121&1127


  Introduction  

Starke 1127 and Starke 1121 are wholly new designed  stackers by Mutrade with more ideal structure that offers  100mm wider platform than Hydro-Park 1127/1123 but  within smaller installation space. Each unit provides 2  dependent parking spaces with the platform moving  vertically only, ground car has to be moved to use the  upper space of platform. Suitable for permanent parking,  valet parking, car storage, or other places with attendant.  In case of short time user only possible on lower  platform, or with attendant or valet parking both levels  are possible for short time user. When used indoor,  operation can be achieved by wall-mounted key switch  panel. For outdoor usage, control post is also optional.

- Parking 2 cars above each other 

- Lifting capacity 2100kg (Starke 1121) or 2700kg (Starke 1127). 

- Standard platform width 2200mm, which can be  maximized to 2700mm.  

- Car heights on ground up to 2050mm. 

- Direct drive by German structure cylinder. 

- Mechanical anti-falling locks protect platform from falling  all the way, and enable multiple stopping heights.

- Synchronization chain keep platform level under all  conditions. 

- 24v control circuit protects users from electric shock 

- Galvanized waving plates ensure the platform in excellent  performance of rust and skid resistance - Anti-rust bolts & nuts passing 48hrs Salt Spray Test. 

- Akzo Nobel powder coating provides long lasting surfificial  protection 

- Top class quality guarantee (CE certifified by German TUV)


s1121

1 Limit switch    2 Control box    3 Power pack    4 Hydraulic cylinder     5 Primary post     6 Carriage   7 Galvanized waving plate     

8  Subsidiary post    9 Front support    


TUV compliant, which is the most authoritative  certification in the world

Certification standard 2006/42/EC and EN14010

Low usage cost

When the platform moves down, it will be driven by gravity, so  there is no electricity consumption for hydraulic power pack

Wider platform

The standard Starke 1127/1121 provide 2200mm usable width,  which can be maximized to 2700mm to extremely allow users  park their cars in the easiest way

Less space occupied

When the platform usable width is wider, the overall width of  Starke 1127/1121 is still less to save more space.

Modular connection, innovative sharing post design

The Starke two post car parking lift owns sharing post design.  Combine multiple units at your will based on usage

Flexible operation location

Operation panel can be placed on the wall or proper position  closing the lift

New hydraulic system which owns Ashkenazi  structure

The hydraulic system adopts German top-level product  structure design, which is stable and reliable, avoid the  maintenance troubles, and its lifetime is twice as long as that  of the old one

Galvanized pallet

Far more beautiful and durable than observed, lifetime more  than doubled. Galvanized waving plates ensure the platform  in excellent performance of rust and skid resistance.

Zero accident security system

All-new upgraded security system, really reaches zero  accident

Dynamic locking device

The moving platform can be held by mechanical locks on the  post to protect cars from falling

More stable electric motors

Newly upgraded power pack unit system


s1121


Further strengthened main structure of the  equipment 

The thickness of the steel plates and the weld joints have increased  by 10% compared to the predecessor 

Gentle metallic touch, excellent surface finishing 

After applying AkzoNobel powder, color saturation, weather  resistance and its adhesion are significantly enhanced 

Rich color 

Great care is taken with the treatment of lacquer face, in order to improve  the quality of products on surface looking to the maximum extent 

Strong adhesion 

The weather resistance of the spray powder has better performance  under special technology, which can stand wear and tear

Superior chains provided by Korean chain  manufacturer 

The life span is 20% longer than that of the domestic chains 

Galvanized screw bolts based on the European  standard 

Longer lifetime, much higher corrosion resistance 

Unique hydraulic centralized control (optional) 

Perfect shared power pack unit solution 

Laser cutting + robotic welding 

Accurate laser cutting improves the accuracy of the parts, and  automated robotic welding makes the weld joints more firm and  beautiful


s1121

s1121


Mechanical anti-falling safety lock on each post holds the  platform to prevent falling 

New and unique carriage mechanism keeps the platform  always horizontal no matter forward or reverse parking 

24v electric lock release has no harm for operator 

Electric protection for power over load or under voltage. 

Auto locking system in case electrical failure

Emergency stop button can be pressed to stop platform  moving at once 

Pressure relief valve & throttle valve 

Limited switch in the top of the post. When the  platform goes to the appointed height, it will  automatic stopped to avoid the wrong operation 

Synchronization chain keeps the  platform always in balance 

10 Electric protection for power  over load or under voltage

s1121

s1121

s1121

s1121

s1121



Clear platform width of 2200 mm for car widths of 2000 mm. For large touring sedans we recommend a clear platform width of at least 2300-2700 mm. According to ISO 3864 the floor has to be marked with 100 mm wide yellow-black at a distance of 500 mm from the platform edge by the purchaser (to  be performed according to local regulations.) The lowering speed of an empty platform is considerably lower than a loaded one. It is not possible to have channels or undercuts and/or concrete haunches along the floor-to-wall joints. It the event that channels or undercuts are  necessary, the system width needs to be reduced or the installation width needs to be wider. The manufacturer reserve the right to construction or model modifications and/or alterations. Furthermore, the right to any subsequent part modification  and/or variations and amendments in procedures and standards due to technical and engineering progresses in the art or due to environmental  regulation changes, are also hereby reserved.



s1121


Powder coating is applied as a  free-flowing, dry powder. It is  typically applied electrostatically  and is then cured under heat to  allow it to flow and form a "skin".  It is usually used to create a  hard finish that is tougher than  conventional paint.


Scope of application

Suitable for residential buildings, office  buildings and business premises, hotels Only for long-term users that have been  instructed on how to use the system For frequently changing users (e.g. for  office, hotel and business premises or  similar): - only parking on ground level - performance of technical system  adjustments in necessary - consultation with Mutrade is  mandatory

Electrical installation preparation

Cabling preparation to be performed  by the customer: - Up to the main switch to be in place  prior to starting the installation  operations - Connection to the main switch during  installation - System functional check testing can  be performed by the electrician  provided by the customer Grounding and potential equalization:

- To be performed by the customer  compliant to local regulations - Connections required every 10 meters

Temperature

The installation is designed to operate  between +5°and +40°C. Atmospheric  Humidity: 50% at +40°C. If the local  circumstances differ from the above  please contact Mutrade.

Parking

- Drive the car backward onto the  appropriate position of the platform.  Collision with the control arm and side  beams shall be avoided. - Put the brake on after vehicle parked  on the targeted position to avoid any  accidental movement. - Open the car door carefully to avoid  any collision. Pay attention to the waving

plates and side beams in case any  falling down of person. - Turning UP to lift the car to the  appropriate position, and the platform  will be locked automatically. - Before another vehicle parked under  platform, please check and make sure  the nether vehicle is lower than platform  height, to avoid any damage.

Protection against corrosion

Independent of a maintenance  workings has to be carried out  according to Mutrade Cleaning and  Maintenance Instruction regularly. Clean up galvanized parts and  platforms of dirt and road salt as well  as other pollution (corrosion danger)!

Noise protection

Insulation figure of the construction of  min. Rw = 57 dB Walls which are bordering the parking  systems must be done as single wall  and deflection resistant with min. m =  300 kg/ m² Solid ceiling above the parking systems  with min. m = 400 kg/ m² At differing constructional conditions additional sound absorbing measures  are to be provided by the customer The best results are reached by  separated sole plates from the  construction.

Fire safety

Each and every fire safety requirement  and all possible mandatory item(s) and  equipment(s) (fire extinguishing  systems and fire alarm systems, etc.)  are to be provided by the customer.

Railings

If walkways are arranged directly to  the side or behind the systems,  railings have to be provided acc. EN  ISO 13857 by client acc. to local  requirements, height min. 200cm.

We develop, design and manufacture mechanical parking equipment with our own advanced technology and kept consistent high quality.
QUICK LINKS
OUR PRODUCTS
CONTACT US
Our target is to become world class

Copyrights © Qingdao Mutrade Co., Ltd. All Rights Reserved  Technology by leadong