+86-53255579606 or 9608
You are here: Home » Products » Hydro-Park Series » HP2130 » Hydro-Park 2130

Hydro-Park 2130


Hydro-Park 2130 

High-end Four Post Parking Lift 




Hydro-Park 2130 is the unique Four Post Parking Lift designed by  Mutrade. It’s a kind of valet parking equipment, suitable for both  commercial and residential parking purposes. It moves only  vertically, so the users have to clear the ground level to get the  higher level car down. It is hydraulic driven with chains. The  equipment can be used for both sedan & small SUV.

-Commercial grade design 

- 3000kg capacity makes it possible for all SUVs. 

- 2150mm usable platform width makes it much easier for parking  and retrieve. 

- Galvanized and corrugated full platform guarantees safety and  long lifetime 

- Anti-slip corrugated deck protects both vehicle and driver from  possible slip and damage but still high-heel shoe friendly 

- Hydraulic cylinder and chain drive system for smooth operation 

- The pole with piston is chroming to anti

-corrode to ensure its long  using life 

- Individual hydraulic power pack and control panel, both covered in  the back of platform for security and rainproof. 

- Self-standing and self-support structure  

- Electric key switch for security and safety 

- Automatic shut-off if operator releases the key switch 

- Dynamic mechanical locks as anti-falling device hold the platform  in place 

- Platform can be stopped at different heights to fit for various  vehicles and ceiling heights 

- Hydraulic overloading protection


1 Top cover plate of post    2 Post    3 Side beam    4 Ramp    5 Waving plates

6 Chain    7 Rear cover plate     8 Cylinder   


1.Full platform for easy parking 

The full platform is covered by waving plates with usable width 2150mm, to make parking much easier and suitable for  all types of vehicles. 

2. Strong and stable Structure 

4-Post design makes the structure stronger and more stable. 

3. Dynamic locking device 

We are offering the safest parking machine in the market, the equipment is built under the CE standard and there are   more than 10 safety features to ensure our clients will always get protection. Especially, there are a range of locking tabs  on the posts to protect cars from accident damage. 

4. Lock down button 

User could press LOCK DOWN button to make platform descend a little and sit on locking tab after platform go up to   top position, to make cylinder “rest” without any pressure. Therefore the hydraulic cylinder could be used for longer   time. 

5. Low usage cost 

When the platform moves down, it will be driven by gravity, so there is no electricity consumption for hydraulic power  pack. 

6. Fast and easy installation 

With professional design and friendly package, it becomes simple on installation. What’s more, detailed installation   manual, drawing and video attached with products will help customers have easier installation work. 

7. Professional packing & delivery 

We have very professional packaging and logistic people to ensure our customer will get the product damage free ,   simple load & unload in time.



- “All the way” 17 mechanical safety lock every 10cm 

- 24v electric lock release ( no harm for operator) 

- Photocell sensor available to check under car and avoid trespass. 

- Electric protection for power over load or under voltage. 

- Auto locking system for power cut as safety features. 

- Emergency stop button. - Pressure relief valve and pressure compensate flow control valve to tripe ensure safety. 

- Limited switch on the side beam, activated by cylinder head (when the platform go to the appointed height, it will  automatic stopped to avoid the wrong operation ) 

- Overload protection device for hydraulic power pack

MUTRADE’s parking equipment has 5 years warranty on structure, and one year warranty on the whole machine. Within the  warranty period, Mutrade is responsible for the parts and structure, not including labor nor any other cost unless pre-agreed.

Power units, hydraulic cylinders, and all other assembly components such as slip plates, cables, chains, valves, switches etc,  are warranted for one year against defects in material or workmanship under normal use. MUTRADE shall repair or replace  at their option for the warranty period those parts returned to the factory freight prepaid which prove upon inspection to  be defective. MUTRADE will not be responsible on any labor costs unless pre-agreed. Mutrade will not responsible for the  modi cation or upgrade of the product from the client unless pre-agreed.

These warranties do not extend to... -defects caused by ordinary wear, abuse, misuse, shipping damage, un-proper installation, voltage or lack of required   maintenance; -damages resulting from purchaser’s neglect or failure to operate products in accordance with instructions provided in the  owner’s manual(s) and/or other accompanying instructions supplied; -normal wear items or service normally required to maintain the product in a safe operating condition; -any component damaged in shipment; -other items not listed but may be considered general wear parts;

1.How many cars could be parked for each unit?  2 cars. One is on the ground and another is on the platform. 

2. Could Hydro-Park 2130 be used for parking SUV?  Yes, the rated capacity of Hydro-Park 1123 is 3000kg, so all SUVS can be available. 

3. Can Hydro-Park 2130 be used outdoor?  Hydro-Park 2130 is capable for both indoor and outdoor use . The finishing is powder coating and plate cover is galvanized,  with rust-proof and rain-proof. When used indoor, you need consider the ceiling height. 

4. What's the supply voltage?  Standard voltage is 220v, 50/60Hz, 1Phase. Other voltages could be customized according to clients' request. 

5. Is the operation easy?  Yes. Keep holding the key switch to operate the equipment, which will stop at once if your hand releases.

About the customized size:

If the size of the platform need to be customized based on customer require, difficulties might arise when entering or exiting the cars on the parking units. This depends on car type, the access and the individual driving behavior.  

Operating device:

The position of the operating device depends on the project (switch post, house wall). From bottom of the shaft to the  operating device an empty pipe DN40 with taut wire is necessary


The installation is designed to operate between +5°and +40°C. Atmospheric Humidity: 50% at +40°C. If the lol circumstances  differ from the above please contact MuTrade.


Illumination has to be considered acc. to local requirements by client. Illumination in the shaft for maintenance is required  to be minimum 80 Lux.


Regular maintenance by qualified personnel can be provided by means of an Annual Service Contract.

Protection against corrosion:

Independent of a maintenance workings has to be carried out acc. to MuTrade Cleaning and Maintenance Instruction  regularly. Clean up galvanized parts and platforms of dirt and road salt as well as other pollution (corrosion danger)! Pit must  be always ventilated well.


Product Category

We develop, design and manufacture mechanical parking equipment with our own advanced technology and kept consistent high quality.
Form Name
Copyrights © Qingdao Mutrade Co., Ltd. All Rights Reserved  Technology by leadong